The Expense of Not Getting Your Boiler Repaired

Your boiler is one of the most important essential parts of your home, and if it isn't functioning correctly, it can have severe consequences.

A boiler that isn't repaired promptly will become less efficient, consume more energy, and increase the risk of catastrophic failure.

Not getting your boiler repaired can also lead to higher utility bills. Inefficiency caused by broken boiler results in wasted energy and money spent on heating your home.

In addition, a malfunctioning boiler puts additional strain on other parts of your heating system, leading to even further damage and even higher repair costs.

If your boiler breaks, you may be unable to take showers or baths, do laundry, or even cook meals. In addition, if your boiler isn't properly maintained, it can be hazardous. Carbon monoxide poisoning can be very risky if your boiler isn't functioning correctly.

The most serious risk associated with an unmaintained boiler is catastrophic failure. A boiler is under immense pressure when operating correctly, and if it isn't maintained, that pressure can grow to the point where the boiler explodes. If you notice any problems, you must get your boiler repaired as soon as possible.

Common boiler issues

When a boiler breaks down, the experience can be very costly and stressful. Without a boiler, you will be without heat and hot water in your home. A boiler breakdown can also cause extensive damage to your property if it is not fixed quickly.

Thermostat Issues

If your boiler is shutting down or turning on improperly, it may be due to a malfunctioning thermostat. This situation can cause damage to your boiler over time, eventually leading to a breakdown. To avoid this, check your thermostat regularly and ensure it works properly. 

Pilot Lights and Electronic Igniters

The pilot light on the boiler can go out for a number of reasons, ranging from a draft ty room to a dirty burner. If your pilot light turns off, you'll need to relight it according to the manufacturer's instructions.

An electronic igniter can also fail, preventing your boiler from starting up. The major cause of this is usually the build-up of dirt and debris on the igniter itself. You can clean the igniter with a brush or compressed air, but if it continues to fail, you may need to replace it.

Lime Scale and Mineral Deposits

If you have a boiler in your home, it is essential to know the potential for deposits of minerals and limescale to build up. These deposits generally come from the water used to fill the boiler; if they are not removed, they can build up and restrict water. This can lead to boiler breakdown, so it is essential to keep an eye on the build-up of these deposits. You can use a few simple methods to remove them, such as using a descaling solution, and so it is worth taking the time to do this regularly.

Circulator Pump Failure

If your boiler's circulator pump fails, it can cause a complete breakdown of your boiler. The circulator pump is responsible for moving hot water from the boiler to the radiators. Without it, the water in the boiler will overheat, and the pressure will build up, eventually leading to a complete breakdown.

Water Leaks from The Boiler

Water leaks are very common problems with older boilers. Cracks and loose joints in the boiler can cause water to leak, and the pressure relief valve is another common source of water leaks. If you have an older boiler, it's essential to be aware of these potential problems so that you can prevent them beforehand. 

SNR Plumbing & Heating

24 Union avenue, Apt# 1
Nutley, NJ
1 (929) 248-7465

Lifecycle of A Boiler System

A boiler system has a typical lifespan of 15-20 years, but it can last much longer with proper maintenance. Three main factors will affect how long your boiler will last: quality of parts, installation, and maintenance. 

If you purchase a high-quality boiler with durable parts, it will undoubtedly last longer than one with lower-quality materials. In addition, if the boiler is installed correctly by a professional and maintained regularly, it will add to the system's longevity. 

To experience the full potential of your boiler and ensure its long lifespan, invest in quality materials, hire a professional for installation, and commit to annual maintenance check-ups.

How can you increase the lifespan of your boiler?

As a homeowner, you surely want your boiler to last as long as possible. Luckily, there are a few things you can do to help extend the lifespan of your boiler system. 

Purchase a reliable boiler system

A boiler is one of the essential parts of a home's heating system. It needs to be reliable and efficient to increase the lifespan of your Boiler System. You would not want a boiler that breaks down frequently. Here are some tips on how to select a boiler that has been manufactured to be reliable and efficient: 

1. Choose a boiler certified by an independent testing agency to ensure that the boiler meets all the necessary safety and performance standards.

2. Look for a boiler with a manufacturer's warranty. This will give you peace of mind knowing that you can get repairs or replacements if needed.

3. Make sure to have your installer thoroughly check the installation site before proceeding with the installation. In this way, you ensure that you will not be faced with any problems in the future.

Choose a boiler suited to your needs.

When it comes to your boiler, size matters. If you install a boiler that is too small, it will have to work harder to heat your home, which can put excessive pressure on the system, leading to problems down the line. Conversely, a too-large boiler will be less efficient and will likely not operate at its optimal level, which can also decrease its lifespan.

To get the most out of your boiler system and increase its lifespan, choosing a model with the right kW output for your home is essential. Once you have found the perfect size, be sure to have it installed by a qualified professional to get the best results.

A Gas Safe registered engineer should conduct installation work.

Unqualified individuals conducting gas work on boilers is hazardous and illegal. Hiring a Gas Safe registered engineer to carry out any gas work on your boiler system will increase its lifespan.

This is because they are fully trained and qualified, meaning they will do the job correctly and to a high standard. Not only this but if something goes wrong, you will be covered by their insurance. So, for safety and the boiler system's longevity, make sure you only use a Gas Safe registered engineer.

Organize an annual servicing for your boiler

A boiler is a very essential part of any home and needs to be in good working condition to avoid costly repairs or replacements. That's why it's vital to have a boiler health check every year, which can help increase the lifespan of your boiler system.

During a boiler health check, experienced technicians inspect your boiler to ensure it is functioning correctly. They will also look for potential issues that could cause problems. This preventative maintenance appointment could save you money and headaches in the long run.

SNR Plumbing & Heating

24 Union avenue, Apt# 1
Nutley, NJ
1 (929) 248-7465

5 Tips To Prevent Leaks & Water Damage In Your Home

Water damage is one of the most common problems homeowners face. There are a lot of possible causes of water damage, such as leaky pipes, faulty plumbing, or heavy rains.

No matter what the reason, water damage can be a significant headache. It can lead to mold growth, structural damage, and even health problems.

One of the widely known and common causes of water damage is leaky pipes. Over time, lines can leak due to corrosion or wear and tear.

These leaks can remain undetected for long periods, causing extensive water damage before they are finally discovered.

Faulty plumbing is another common cause of water damage. This can include everything from leaky faucets to broken sewer lines.

Heavy rains can also cause water damage. When rainwater seeps into your home through cracks in the foundation or gaps in the windows or doors, it can cause serious problems.

5 Tips To Prevent Leaks & Water Damage

  1. Cleaning your gutters is essential to prevent water damage. Water can seep into your home and cause problems like mold and mildew. It can also cause severe damage like wood rot and other structural damage. By regularly cleaning your gutters, you can avoid these problems. You must make it a routine to clean your gutters at least twice a year -depending on when it is perfect for you. If you have a collection of trees and plants around your house, you may need to clean them more often. 
  2. The most crucial thing that can be done to prevent water damage is to investigate and fix any leaks. Leaks can be caused for various reasons, including poor plumbing, damaged gutters, and cracks in your foundation. If you discover a leak, fix it as soon as possible. This is essential so that no further damage is caused. Make sure the gutters are clear and in good shape. Inspect your plumbing regularly and fix any leaks as soon as they're discovered.
  3. A roof inspection is essential to prevent water damage. If you think your roof may leak, it's necessary to check it out as soon as possible. A professional roof inspector can tell you if there is a problem and what needs to be done to fix it. Water damage can be pricey and time-taking to repair. It's important to catch leaks early so they don't cause more damage. A proper roof inspection to look for water damage can save you money and headaches in the long run.
  4. Water detection devices are the best way to protect your home from water damage. There are a variety of water detection devices available on the market, from simple moisture sensors to more sophisticated systems that can shut off your water automatically in the event of a leak. Please choose the right design for your home and budget, and be sure to have it professionally installed by a qualified technician.
  5. If the water pressure of your property is too high, it can cause your pipes and hoses to fail. The water pressure of your home should be between 40 and 70 psi. If it’s too high, you could damage your home’s plumbing. You can install a pressure-reducing valve to protect your plumbing if you have high water pressure. You should also have a professional check your home’s plumbing to ensure it can handle the higher pressure.

SNR Plumbing & Heating

24 Union avenue, Apt# 1
Nutley, NJ
1 (929) 248-7465